Fujikura 41S+ Clad Alignment Fusion Splicer

Deskripsi

Fujikura 41S+ Clad Alignment Fusion Splicer

Fujikura 41S+ Clad Alignment Fusion Splicer is the ultimate tool designed to produce high-quality splicing for fiber optic networks. Combining innovative features with robust performance, this splicer ensures precise alignment and reliable results for a wide range of fiber optic applications.

Features

Active Fusion Control Technology

Active fusion control by cleave condition: One of main causes of high splice loss is bad cleave end face quality. The 41S+ analyses the condition of both left and right cleave end faces and applies optimal fusion control. This new technology improves splice loss significantly and greatly reduces needs for rework.
Active Fusion control by fiber brightness: Fusion is easily affected by changes in the environment. The 41S+ uses real-time fusion parameter control by analysing the fiber brightness intensity during splicing. This contributes to stable, low-loss splice results.

Active Blade Management Technology

The 41S+ and CT50 fiber-cleaver are equipped with wireless data connectivity. This capability allows automatic cleaver blade rotation when the 41S+ judges the blade is worn. The 41S+ displays the remaining blade life and informs the user when a blade height change, blade position change, or new blade is required.
When the frequency of large cleave angle or other cleave problems increases, Active Blade Management Technology can detect this increasing ratio of poor cleaves and rotate the blade position automatically. Active Blade Management Technology therefore significantly reduces the frequency of poor quality cleaves. Even when a poor cleave is detected, the 41S+ compensates by using Active Fusion Control Technology to apply optimized fusion to reduce the incidence of high splice loss. By using these two key technologies together, the 41S+ minimizes the occurrence of high splice loss and greatly reduces the need for rework and re-splicing.

User friendly

The 41S+ can accommodate splice sleeves with a diameter of up to 6.0mm, so it supports a wide range of protection sleeve sizes.
Easy replacement of consumable parts: The 41S+ electrodes come as an assembly including electrode mounting fixture and thumb screw. The thumb screw is easily loosened or tightened by hand without tools, which makes it simple to replace electrodes. The CT50 has a user-replaceable blade and rubber clamps, so there’s no need to send the device to a service center for blade or clamp replacement.

Multi-functional carrying case with integrated workstation

There are multiple ways to utilize the 41S+ carrying case. The 41S+ is ready to use just by opening the case, but can be removed with the work tray, or the tray can be placed on top of the carrying case or other work surface, mounted it on a tripod, etc. The work tray has a drawer which can slide open to expand the work area and it includes convenient features such as a recess to lock an included alcohol dispensing bottle in place to prevent it from falling.

• More consistent and stable low-loss splicing
• Core loss estimation function using Warm Image Splicing Technology
• Compact, robust splicer designed for FTTx applications
• Fast splicing time – six seconds
• 5″ touch panel with easy operation
• Bluetooth connectivity

Specifications

Fiber Alignment Method		Active clad alignment
Fiber Count can be Spliced		Single fiber
Applicable Fiber
Fiber Type		Single mode optical fiber
		Multi mode optical fiber
Cladding Dia		Approx. 125μm
Applicable Coating
Sheath Clamp		Coating dia. : Max. 3000μm
		Cleave length : 5 to 16mm *1
Fiber Splice Performance
Splice Loss *2		ITU-T G.652 : Avg. 0.03dB
		ITU-T G.651 : Avg. 0.01dB
		ITU-T G.653 : Avg. 0.05dB
		ITU-T G.655 : Avg. 0.05dB
		ITU-T G.657 : Avg. 0.03dB
Splice Time *3		SM FAST mode : Avg. 6 to 7sec.
Applicable Protection Sleeve
Sleeve Type		Heat shrinkable sleeve
Sleeve Length		Max. 66mm
Sleeve Dia.		Max. 6.0mm before shrinking
Sleeve Heat Performance
Heat Time *4		60mm mode : Avg. 25 to 27sec.
Fiber Tensile Test Force		Approx. 2.0N
Electrode Life *5		Approx. 5000 splices
Physical Description
Dimensions W		Approx. 131mm without projection
Dimensions D		Approx. 201mm without projection
Dimensions H		Approx. 79mm without projection
Weight		Approx. 1.3kg including battery
Environmental Condition
Temperature		Operate : -10 to 50°C
		Storage : -40 to 80°C
Humidity		Operate : 0 to 95%RH non-condensing
		Storage : 0 to 95%RH non-condensing
Altitude		Max. 5000m
AC Adaptor
Input		AC100 to 240V, 50/60Hz, Max. 1.5A
Battery Pack
Type		Rechargeable Lithium Ion
Output		Approx. DC14.4V, 6380mAh
Capacity *6		Approx. 300 splice and heat cycles
Temperature		Recharge : 0 to 40°C
		Long Term Storage : -20 to 30°C
Battery Life *7		Approx. 500 recharge cycles
Display
LCD Monitor		TFT 4.9 inches with touch screen
Magnification		Approx. 132 to 300x
Illumination
V-Grooves		LED lamp
Interface
PC		USB 2.0 Mini B type
External LED Lamp		USB 2.0 A type Approx. DC 5V, 500mA
Ribbon Stripper		Mini DIN 6pin DC 12V, Max. 1A
Wireless *8		Bluetooth 4.1 LE
Data Storage
Splice Mode		100 splice modes
Heat Mode		30 heat modes
Splice Result		20000 splices
Splice Image		100 images
Screw Hole for Tripod		1/4-20UNC
Other
Automatic Functions		Fusion control
Reference Guide		PDF file stored in splicer
Sheath Clamp		Easy sleeve positioning clamp
Electrode		Replaceable without tool
Standard Package
Description	Model No.		Qty
Core Alignment Fusion Splicer	41S+		1pc
(1) Battery Pack*	BTR-11A		1pc
(2) AC Adapter	ADC-19A		1pc
(3) AC Power Cord	ACC-08, 09, 10, 11 or 12		1pc
(4) USB Cable	USB-01		1pc
(5) Electrodes, for spare	ELCT2-16B		1pair
(6) Fiber Holder Set Plate	SP-01		1pair
(7) Carrying Case	CC-36		1pc
(8) Work Tray	WT-08		1pc
(9) Tripod Screw	TS-03		1pc
(10) Carrying Case Strap	ST-03		1pc
(11) Alcohol Dispenser	AP-02		1pc
(12) Quick Reference Guide	PDF file stores in Splicer
Single Fiber Stripper	SS03		1pc
Optical Fiber Cleaver	CT50		1pc
(1) Fiber Scrap Collector	FDB-05		1pc
(2) Fiber Setting Plate	AD-10-M24		1pc
(3) Case, for cleaver	CC-37		1pc
(4) Hexagonal Wrench	HEX-01		1pc

* Please follow IATA regulation when shipping the battery by air.