Deskripsi
UNI-T UPO1202CS 200MHz, 1GSa/s 2Channel Ultra Phosphor Oscilloscope
UPO1000CS series is a multi-function, cost-effective digital phosphor oscilloscope. It can be widely used in the fields of electronic and electrical design, debugging, education and industrial design. UPO1000CS series adopts parallel digital signal processing technology, which greatly improves the data processing speed and waveform capture rate. The original Ultra Phosphor technology can present the cumulative effect of the tested signal as a multi-layered afterglow. Compared with traditional digital storage oscilloscopes, the persistence of digital phosphor oscilloscopes can present three-dimensional waveform data of amplitude, time and signal intensity. Fast Acquire technology can accurately capture abnormal events such as video, jitter, noise and runt signals.
Features
- Analog channel bandwidth: 200MHz, 100MHz.
- Number of analog channels: 2.
- Storage depth of each channel: 56Mpts.
- Sampling rate: 1GSa/s (non-interleaving: independent sampling per channel).
- Waveform capture rate：500,000wfms/s.
- Hardware real-time waveform uninterrupted recording of 100000 waveforms.
- Ultra-Phosphor super fluorescent display effect, up to 256 levels of gray display.
- Support RS232, I2C, SPI, CAN and LIN trigger.
- Innovative RS232, I2C, SPI, CAN and LIN hardware decoding.
- Vertical scale: 1 mV/div-20 V/div.
- Low background noise：<100μVrms.
- 1M points enhanced FFT function. Support frequency setting, waterfall diagram, detection setting and marker measurement etc.
- 36 kinds of waveform parameters can be automatically measured.
- Rich trigger functions (edge, pulse width, video, slope, runt, overshoot, delay, timeout, duration, setup and hold, Nth edge and pattern trigger).
- Multi-Scopes support dual-channel independent trigger fluorescence display.
- Multi-channel independent 7-bit hardware frequency counter.
- DVM supports dual-channel independent AC and DC true RMS measurement.
- Waveform arithmetic functions (FFT, +, -, ×, ÷, digital filtering, logic operations, and advanced operations).
- Rich interfaces: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail).
- Support SCPI programmable instrument standard command.
- Support WEB access and control.
- 7 ” WVGA (800 × 480) TFT LCD.
Specifications
| Model |
UPO1102CS |
UPO1202CS |
| Analog Bandwidth (-3dB) |
100MHz |
200MHz |
| Rise time (Typical Value) |
≤3.5ns |
≤1.8ns |
| Channels | 2 analog channel | |
| Sampling Methods | Real-Time Sampling | |
| Acquisition Mode | Sampling, peak detection, averaging, high resolution | |
| Real Time Sampling Rate | 1GS/s (Each channel) | |
| Average | Average: 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192 | |
| Memory Depth | 56Mpts (Each channel) | |
| Waveform Capture Rate | 150,000 wfms/s | |
| 500,000 wfms/s (Fast Acquire mode) | ||
| Hardware Real-Time Waveform Recording and Playback | 100,000 frames | |
| Display | 7-inch (800 x 480) TFT display | |
| Interface | USB Host, USB Device~LAN, EXT Trig, AUX Out (Trig Out/, Pass/Fail) | |
| Power Supply | 100V – 240V AC, 50/60Hz, 100VA | |
| Dimension | 306 (W) x 138 (H) x 107 (D) mm | |
| Weight | 3.0kg | |
| Standard Accessories | -Power Cord -USB Cable Data -Passive Probe 200MHz/100MHz 2 (UT-P05/UT-P04) |
|
Ulasan
Belum ada ulasan.