Deskripsi
UNI-T MSO2204 200MHz, 2GSa/s, 4CH + 16 LA, Digital Oscilloscope
The MSO/UPO2000 series digital phosphor oscilloscope is a multifunctional and high-performance oscilloscope based on UNI-T’s original Ultra Phosphor technology. It realizes the combination of ease of use, excellent technical indicators and many functional features. It can help users complete the measurement work faster. It is an oscilloscope designed for general design / debugging / testing needs in many fields, such as communication, semiconductor, computer, instrumentation, industrial electronics, consumer electronics, automotive electronics, on-site maintenance, R & D / education, etc. Fast Acquire technology can accurately capture abnormal events such as video, jitter, noise and low wave signals.
Features
- Analog channel bandwidth: 200MHz, 100MHz
- Real time sampling rate of analog channel 2GSa/s
- Real time sampling rate of digital channel 1GSa/s (only MSO)
- Number of analog channels: 2 or 4
- Storage depth of each channel: 56Mpts
- 16 digital channels, storage depth 56Mpts (only MSO)
- Waveform capture rate up to 1,000,000wfms/s
- Built in 50MHz dual channel function / arbitrary waveform generator (only MSO-S). It supports real-time loading of oscilloscope screen data to AWG arbitrary wave output.
- Support Bode Plot loop test and analysis function
- Hardware real-time waveform uninterrupted recording and analysis up to 120,000 frames
- Waveform operation functions (+, -, ×, ÷, digital filtering, logic operation and advanced operation)
- 4M points enhanced FFT, supporting frequency setting, waterfall diagram, detection setting and mark measurement, etc.
- Auto measurement of 36 waveform parameters
- Supports parameter measurement while scanning
- Multi-Scopes supports multi-channel independent trigger and fluorescent display
- Multi-channel independent 7-bit hardware frequency counter
- DVM supports multi-channel independent AC / DC true RMS measurement
- Rich trigger functions: edge, pulse, video, slope, runt, over amplitude pulse, delay, timeout, duration, setup/hold, Nth edge and pattern trigger
- Area trigger function, which can be used to capture accidental signals and observe complex signals
- Protocol trigger and decoding function (optional):RS232, I2C, SPI, CAN, CAN-FD, LIN, FlexRay
- Ultra-Phosphor super fluorescent display effect, up to 256 levels of gray display
- 8-inch 800×480 capacitive touch, supporting various gesture operations: click, slide, zoom, edit, drag, etc.
- Rich interfaces: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out、Pass/Fail), AWG, VGA Support SCPI programmable instrument standard commands
- Support web access and control
Specifications
Model |
UPO2102 |
UPO2202 |
Analog Bandwidth (-3dB) |
100MHz |
200MHz |
Rise time (Typical Value) |
≤3.5ns |
≤1.8ns* |
Channels |
UPO 2XX2: 2 analog channel, UPO 2XX4: 4 analog channel |
|
16 digital channels (UPO2000-16LA is optional for UPO series) |
||
2-channel arbitrary wave generator output (MSO-S series AWG optional activation software function is required) |
||
Sampling Methods |
Real-Time Sampling |
|
Acquisition Mode |
Sampling, peak detection, envelope, high resolution, averaging |
|
Real Time Sampling Rate |
Analog channel: 2GS/s (half channel interleaved), 1GS/s (all channel) |
|
Average |
After all channels are sampled for N times at the same time, the N times can be selected from 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, and 8192 |
|
Memory Depth |
Analog channel: Automatic, 7kpts, 70kpts, 700kpts, 7Mpts, 28Mpts, 56Mpts are optional |
|
Digital channel (MSO model only): Automatic, 7kpts, 70kpts, 700kpts, 7Mpts, 14Mpts, 28Mpts, 56Mpts are optional |
||
Waveform Capture Rate |
200,000wfms/s |
|
1,000,000wfms/s (Fast Acquire) |
||
Hardware Real-Time Waveform Recording and Playback |
120,000 frames |
|
Display |
8-inch (800×480) HD capacitive touch display |
|
Interface |
USB-Host, USB-Device, LAN, EXT Trig, AUX Out (Trig Out\Pass/Fail) Output, Signal Source Output Interface (only MSO-S model), VGA |
|
Dimension |
370 (W) x 185 (H) x 115 (D) mm |
|
Weight |
4.5kg |
|
Standard Accessories | -Power Cord -USB Cable Data -BNC-BNC Straight-Through Cable (UT-L45) (only MSO-S) -BNC Red and Black Alligator Clip Cable (UT-L02A) (only MSO-S) -Passive Probe 200MHz/100MHz 2/4 (UT-P05/UT-P04) -Logic Analyzer Probe (UT-M15) (only MSO) |
* The typical rise time of 200MHz oscilloscope is 2.0ns for 1mV/div and 2mV/div
Ulasan
Belum ada ulasan.