Description
TEXIO DCS-1072B (1GS/s 2ch 70MHz) Digital Storage Oscilloscope
10M Point/ch Long memory, 1GS/s Sampling , 7inches WVGA LCD Digital Storage Oscilloscope
The TEXIO DCS-1072B is a powerful and versatile digital storage oscilloscope designed for a wide range of applications, including research, development, and testing in electronics, communications, and other fields.
Features
- 100MHz/70MHz/50MHz Digital Storage Oscilloscope
- Waveform update rate up to 50,000wfms/s
- 256 color gradient 7inches WVGA display
- 10M memory depth per channel independently
- 1M FFT mathematical sampling analysis mode
- Zoom In/Play and Pause Function
- Diversified Trigger Functions
- X-Y Mode Display
- Go/NoGo Function
- Data Log Function
- Digital Filter Function
- 36 Measurement Parameter Selections
Specifications
|
DCS-1052B |
DCS-1054B |
DCS-1072B |
DCS-1074B |
DCS-1102B |
DCS-1104B |
|
| Vertical | ||||||
| Channels | DCS-1xx4B : 4ch , DCS-1XX2B : 2ch+EXT | |||||
| Bandwidth |
DC ～ 50MHz |
DC ～ 70MHz |
DC ～ 100MHz |
|||
| Resolution | 8 bit @1MΩ: 1mV~10V | |||||
| Input Impedance | 1MΩ // 16pF | |||||
| DC Gain Accuracy | 1mV: ±4% full scale, >2mV: ±3% full scale | |||||
| Waveform Signal Process | +, -, x, ÷, FFT, FFTrms, User Defined Expression FFT: Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Hanning, or Blackman-Harris |
|||||
| Trigger | ||||||
| Source | CH1, CH2, CH3*, CH4*, Line, EXT** *four channel models only. **two channel models only |
|||||
| Trigger Type | Edge, Pulse Width (Glitch), Video, Pulse Runt, Rise & Fall (Slope), Timeout, Alternate, Event-Delay (1~65535 events), Time-Delay (Duration, 4nS~10S), Bus | |||||
| Coupling | AC, DC, LF rej., Hf rej., Noise rej. | |||||
| Sensitivity | 1div | |||||
| External Trigger (two channel models only) | ||||||
| Range | ±2.5V | |||||
| Sensitivity | DC ~ 100MHz Approx. 100mV | |||||
| Horizontal | ||||||
| Time base Range | 5ns/div ~ 100s/div (1-2-5 increments) ROLL: 100ms/div ~ 100s/div | |||||
| Pre-trigger | 10 div maximum | |||||
| Post-trigger | 2,000,000 div maximum. | |||||
| Real Time Sample Rate | 1GSa/s max | |||||
| Record Length | Max. 10Mpts | |||||
| Acquisition Mode | Normal, Average, Peak Detect, Single | |||||
| Peak Detection | 2nS (typical) | |||||
| Average | selectable from 2 to 256 | |||||
| X-Y Mode | ||||||
| X-Axis Input | Channel 1; Channel 3* *four channel models only | |||||
| Y-Axis Input | Channel 2; Channel 4* *four channel models only | |||||
| Phase Shift | ±3° at 100kHz | |||||
| Cursors and Measurement | ||||||
| Cursors | Amplitude, Time, Gating available; Unit: Seconds(s), Hz(1/s), Phase(degree), Ration(%) | |||||
| Automatic Measurement | 36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime, +Width, -Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase | |||||
| Control Panel Function | ||||||
| Autoset | Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo Autoset | |||||
| Save Setup | 20set | |||||
| Save Waveform | 24set | |||||
| Display | ||||||
| TFT LCD Type | 7”TFT WVGA color display 800 horizontal × 480 vertical pixels (WVGA) | |||||
| Waveform Update Rate | 50,000 waveforms per second, maximum | |||||
| Interface | ||||||
| USB Port | USB 2.0 High-speed host port X1, USB High-speed 2.0 device port X1 | |||||
| Ethernet Port (LAN) | RJ-45 connector, 10/100Mbps with HP Auto-MDIX (4ch Model Only) | |||||
| General | ||||||
| Dimensions | 384mm X 208mm X 127.3mm | |||||
| Weight | 2.8kg | |||||
| Power Source | 100V~240V AC, 50Hz~60Hz, Auto selection, Power consumption: 30 Watts | |||||
Texio DCS-1000B Series Datasheet
Reviews
There are no reviews yet.