Deskripsi
Siglent SDS1000X-E Series Super Phosphor Oscilloscopes
SIGLENT’s SDS1000X-E Super Phosphor Oscilloscopes are available in 100 and 200MHz bandwidths and 2 or 4 analog channels. It has a maximum sample rate of 1GSa/s and a standard record length of 14Mpts. For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design. SDS1000X-E oscilloscopes employ a new generation of SPO (Super Phosphor Oscilloscope) technology that provides excellent signal fidelity and performance. The system noise is also lower than similar products in the industry. It comes with a minimum vertical input range of 500uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/ sec (sequence mode).
SDS1000X-E digital oscilloscope also employs a 256-level intensity grading display function and a color temperature display mode not found in other models in this class. SIGLENT’s oscilloscopes support multiple powerful triggering modes including serial bus triggering. Serial decoding is free and includes IIC, SPI, UART, CAN, and LIN. History waveform recording and sequential triggering enable extended waveform recording and analysis. Another powerful addition is the new 1Mpt FFT math function that gives the SDS1000X-E oscilloscope very high frequency resolution when observing signal spectra. The new design also includes a hardware co-processor that delivers measurements quickly and accurately. The features and performance of SIGLENT’s SDS1000X-E cannot be matched anywhere else in this price class.
Features
- Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Timeout (Dropout), and Pattern
- Free Serial bus triggering and decoding: IIC, SPI, UART, RS232, CAN, and LIN
- Video triggers and supports HDTV
- Low background noise and 500μV/div to 10V/div voltage scales
- 10 types of one-button shortcuts, supports Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print
- Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time segment to capture the qualifying event.
- History waveform record (History) function, the maximum recorded waveform length is 80,000 frames
- Automatic measurement function on 38 parameters, supports Statistics, Gating measurement, Math measurement, History measurement and Ref measurement
- 1Mpts FFT
- True measurement and math can use all 14Mpts of memory
- Preset key can be customized for user settings or factory “defaults”
- Security Erase mode
- Highspeed hardware-based Pass/ Fail function
- Large 7-inch TFT-LCD display with 800 * 480 resolution
- Multiple interface types: USB Host, USB Device (USB-TMC), LAN (VXI-11), Pass / Fail, Trigger Out
- Supports SCPI remote control commands
- Multi-language display and embedded help
- Browser control/onboard webpage for software free monitoring (4 channel models only)
- Bode plotting function controls external generator (SIGLENT SDG or SAG generators, 4 channel models only)
Specifications
| Model |
SDS1104X-E |
SDS1204X-E |
| Bandwidth |
100MHz |
200MHz |
| Sample Rate (Max.) |
Two channel series have a single 1GSa/s ADC, four channel series have two 1GSa/s ADCs. When all channels are enabled, each channel has a maximum sample rate of 500MSa/s. When a single channel per pair is active, that channel has sample rate of 1GSa/s |
|
| Channels |
4 (four channel series) |
|
| Memory Depth (Max.) |
7Mpts/CH (not interleave mode); |
|
| Waveform Capture Rate (Max.) |
100,000wfm/s (normal mode), 400,000wfm/s (sequence mode) |
|
| Trigger Type |
Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video |
|
| Serial Trigger and Decoder (Std) |
IIC, SPI, UART, CAN, LIN |
|
| 16 Digital Channels (four channel series only, option) |
Maximum waveform capture rate up to 1GSa/s, Record length up to 14Mpts/CH |
|
| USB AWG Module (four channel series only, option) |
One channel, 25MHz, sample rate of 125MHz, wave length of 16kpts, isolated output (SAG1021I only) |
|
| Bode Plot (four channel series only) |
Minimum start frequency of 10Hz, minimum scan bandwidth of 500Hz, maximum scan bandwidth of 120MHz (dependent on Oscilloscope and AWG bandwidth), 500 maximum scan frequency points |
|
| Data Logger (four channel series only) |
Sample Logger. The Max sample rate is 25kSa/s, the Min sample rate is 1Sa/s |
|
|
Measure Logger. The Max interval is 10 minutes, the Min interval is 0.1s. The Max number of measurements that can be logged is 4 |
||
| I/O |
USB Host, USB Device, LAN, Pass/Fail, Trigger Out, Sbus (Siglent MSO) |
|
| Probe (Std) |
4 pcs passive probe PP510 |
4/2 pcs passive probe PP215 |
| Display |
7-inch TFT-LCD (800×480) |
|
| Dimensions |
132.6 (W) x 151 (H) x 312 (L) mm |
|
| Weight |
3.8kg |
|
| Standard Accessories | -USB Cable -Power Cord -Passive Probe (4/2) -Certificate of Calibration -Quick Start |
|
Ulasan
Belum ada ulasan.