ICOM IC-V86 VHF Transceiver

Deskripsi

ICOM IC-V86 VHF Transceiver

7 W Output Power and 1500 mW Audio

FEATURES

7 W Output Power and 1500 mW Audio

* Wide open space. Approximate, comparing the IC-V86 with the IC-V80. Communication range may differ depending on operating environment or weather conditions, etc. 7 W output power is only for the IC-V86.

1500 mW Powerful Audio and 1.5 Times* Higher Sound Pressure

* Approximate, comparing the IC-V86 with the IC-V80.

Optional 1500 mW Speaker-Microphone, HM-222HLWP

The combination of the optional HM-222HLWP and the IC-V86/U86* also provides 1500 mW (typ.)  loud audio from the attached speaker-microphone.
* For the transceiver  with a “U” mark on the serial number label.

Dust-Protection, Water Resistance and a Tough Body
(IP54 and MIL-STD 810G)

19 hours* of Long Lasting Battery Life

* EX Hi power with BP-298. TX : RX : standby = 5 : 5 : 90 (3 sec. : 3 sec. : 54 sec. ) (The Power Save function is set to “P–S.16”)

No PC Programming Necessary, Settings Changeable from the Radio*

* PC programming is also available.

Durable BNC Type Antenna Connector

Made in Japan Quality and Reliability

Other Features

• Audio volume/VFO mode/Memory channel mode can be changed with the rotary knob
• Supplied BC-240, battery charger with a charging control function that prolongs the life of the battery
• Integrated VOX function
• 200 memory channels, 1 Call channel and 6 scan edges
• Built-in CTCSS and DTCS encoder/decoder
• Priority, program, memory, skip and tone scanning

SPECIFICATIONS

GENERAL

		IC-V86	IC-U86
Frequency Range (TX/RX guaranteed range)		TX: 144–148 MHz RX: 136–174 MHz	TX: 430–450 MHz RX: 400–472 MHz
Type of Emissions		F2D, F3E (FM, FM-N)
Number of Channels		207 channels (200 memory channels, 1 call channel and 6 scan edges)
Antenna Impedance		50Ω
Power Supply Requirement		7.5V DC
Operating Temperature Range		–20˚C to +60˚C, –4°F to +140°F
Frequency Stability		±2.5ppm (–20˚C to +60˚C, –4°F to +140°F)
Current Drain   (For the transceiver  with a “U” mark on the serial number label)	TX (EX Hi/Hi/Mid/Low)	1.6/1.4/1.0/0.5 A typical	EXP1: 1.6/1.5/1.0/0.5 A typ. EXP2: 1.6/1.4/0.9/0.5 A typ.
	RX (Max. Audio)	450 mA typ. (INT SP), 190 mA typ. (EXT SP, Single end) 450 mA typ. (EXT SP, BTL)	450 mA typ. (INT SP), 190 mA typ. (EXT SP, Single end) 450 mA typ. (EXT SP, BTL)
Dimensions (W×H×D) (Projections not included)		58.6 × 112 × 30.5 mm, 2.3 × 4.4 × 1.2 in (with BP-298)
Weight (Approximate)		300 g, 10.6 oz (with BP-298, FA-B57V)	290 g, 10.2 oz (with BP-298, FA-B57U)
Supplied Accessories		-BP-298/BP-264, battery pack* -BC-240, Desktop charger -BC-242, AC adapter -MB-124, belt clip -Antenna*  * May differ, depending on transceiver version

TRANSMITTER

	IC-V86	IC-U86
Output power (EX Hi/Hi/Mid/Low)	7.0/5.5/2.5/0.5 W	5.5/4/2/0.5 W
Maximum Frequency Deviation	±5.0 kHz/±2.5 kHz (Wide/Narrow)
Spurious Emissions	Less than –60 dB
External Microphone Connector	3-conductor 2.5 (d) mm (1/10″)/2.2 kΩ

RECEIVER

		IC-V86	IC-U86
Sensitivity		–124 dBm typical	EXP1: –121 dBm typical EXP2: –123 dBm typical
Squelch Sensitivity		–126 dBm typical	EXP1: –123 dBm typical EXP2: –125 dBm typical
Selectivity (Wide/Narrow)		75 dB typical/70 dB typical	70 dB typical/68 dB typical
Intermodulation		65 dB typical
Audio Output Power   (For the transceiver  with a “U” mark on the serial number label)	Internal SP	1500 mW typical (with 8 Ω load)
	External SP	450 mW typical (single end) 1500 mW typical (BTL, HM-222HLWP connected)
External Speaker Connector		3-conductor 3.5(d)mm (1/8″)/8Ω

Applicable IP Rating

Ingress Protection Standard
Dust and Water	IP54 (Dust-protection, water resistance)

All stated specifications are subject to change without notice or obligation

 

Datasheet