GW Instek ASR-2000 Series Programmable AC/DC Power Source

GW Instek ASR-2000 Series Programmable AC/DC Power Source

Features

Output Rating: AC 0 – 350 Vrms, DC 0 – ± 500 V
Output Frequency up to 999.9 Hz
DC Output (100% of Rated Power)
Measurement Items: Vrms, Vavg, Vpeak, Irms, IpkH, Iavg, Ipeak, P, S, Q, PF, CF
Voltage and Current Harmonic Analysis(THDv, THDi)
Remote Sensing Capability
OVP, OCP, OPP, OTP, AC Fail Detection and Fan Fail Alarm.
Support Arbitrary Waveform Function
Output Capacity: 500VA/ 1000VA
Customized Phase Angle for Output On/Off
Sequence and Simulation Function(up to 10 sets)
Interface: USB, LAN(std.); RS-232+GPIB(opt.)
Built-in External Control I/O and External Signal Input
Built-in Output Relay Control
Memory Function (up to 10 sets)
Built-in Web Server

Description
The ASR-2000 series, an AC+DC power source aiming for system integration or desktop applications, provides both rated power output for AC output and rated power output for DC output. Ten ASR-2000 output modes are available, including 1) AC power output mode (AC-INT Mode), 2) DC power output mode (DC-INT Mode), 3) AC/DC power output mode (AC+DC-INT Mode), 4) External AC signal source mode (AC-EXT Mode), 5) External AC/DC signal source mode (AC+DC-EXT Mode), 6) External AC signal superimposition mode (AC-ADD Mode), 7) External AC/DC signal superimposition mode (AC+DC-ADD Mode), 8) External AC signal synchronization mode (AC-SYNC Mode), 9) External AC/DC signal synchronization mode (AC+DC-SYNC Mode), 10) External DC voltage control of AC output mode (AC-VCA Mode).

The ASR-2000 series provides users with waveform output capabilities to meet the test requirements of different electronic component development, automotive electrical devices and home appliance, including 1) Sequence mode generates waveform fallings, surges, sags, changes and other abnormal power line conditions; 2) Arbitrary waveform function allows users to store/upload user-defined waveforms; and 3) Simulate mode simulates power outage, voltage rise, voltage fall, and frequency variations. When the ASR-2000 series power source outputs, it can also measure Vrms, Vavg, Vpeak, Irms, Iavg, Ipeak, IpkH, P, S, Q, PF, CF, 100th-order Voltage Harmonic and Current Harmonic. In addition, the Remote sense function ensures accurate voltage output. The Customized Phase Angle for Output On/Off function can set the starting angle and ending angle of the voltage output according to the test requirements. V-Limit, Ipeak-Limit, F-Limit, OVP, OCP, OPP function settings can protect the DUT during the measurement process. In addition to OTP, OCP, and OPP protection, the ASR-2000 series also incorporates the Fan fail alarm function and AC fail alarm function.

SKU: ASR-2000 Series Kategori: Power Supplies Tag: ac, asr-2000, asr-2050, asr-2050r, asr-2100, asr-2100r, dc, gw instek, power, programmable, source

Deskripsi
Ulasan (0)

Deskripsi

Specifications

				ASR 2050/ASR-2050R	ASR-2100/ASR-2100R
INPUT RATING (AC)
NORMINAL INPUT VOLTAGE				100 VAC to 240 VAC
INPUT VOLTAGE RANGE				90 VAC to 264 VAC
PHASE				Single phase, Two-wire
INPUT FREQUENCY RANGE				47 Hz to 63 Hz
MAX. POWER CONSUMPTION				800 VA or less	1500 VA or less
*POWER FACTOR 1**		100VAC		0.95 (typ.)
		200VAC		0.90 (typ.)
MAX. INPUT CURRENT		100VAC		8A	15A
		200VAC		4A	7.5A
*1 For an output voltage of 100 V/200 V (100V/200V range), maximum current, and a load power factor of 1.
AC MODE OUTPUT RATINGS (AC rms)
VOLTAGE		Setting Range*1		0.0V to 175.0V / 0.0V to 350.0V
		Setting Resolution		0.1V
		Accuracy*2		±(0.5% of set + 0.6V / 1.2V)
OUTPUT PHASE				Single phase, Two-wire
*MAXIMUM CURRENT3**		100V		5A	10A
		200V		2.5A	5A
*MAXIMUM PEAK CURRENT4**		100V		20A	40A
		200V		10A	20A
POWER CAPACITY				500VA	1000VA
FREQUENCY		Setting Range		AC Mode: 40.00Hz to 999.9Hz, AC+DC Mode: 1.00Hz to 999.9Hz
		Setting Resolution		0.01Hz (1.00 to 99.99Hz), 0.1Hz (100.0 to 999.9Hz)
		Accuracy		For 45Hz to 65Hz: 0.01% of set, For 40Hz to 999.9Hz: 0.02% of set
		Stability*5		± 0.005%
OUTPUT ON PHASE				0.0° to 359.9° variable (setting resolution 0.1°)
*DC OFFSET6**				Within ± 20 mV (TYP)
1. 100V / 200V range 2. For an output voltage of 17.5V to 175V / 35V to 350V, sine wave, an output frequency of 45Hz to 65Hz, no load, DC voltage setting 0V (AC+DC mode) and 23°C ± 5°C 3. For an output voltage of 1V to 100V / 2V to 200V, Limited by the power capacity when the output voltage is 100V to 175V / 200V to 350V. 4. With respect to the capacitor-input rectifying load. Limited by the maximum current. 5. For 45Hz to 65Hz, the rated output voltage, no load and the resistance load for the maximum current, and the operating temperature. 6. In the case of the AC mode and output voltage setting to 0 V.
OUTPUT RATING FOR DC MODE
VOLTAGE		Setting Range*1		-250V to +250V / -500V to +500V
		Setting Resolution		0.1V
		Accuracy*2		±(\|0.5 % of set\| + 0.6V / 1.2V)
*MAXIMUM CURRENT3**		100V		5A	10A
		200V		2.5A	5A
*MAXIMUM PEAK CURRENT4**		100V		20A	40A
		200V		10A	20A
POWER CAPACITY				500W	1000W
1. 100V / 200V range 2. For an output voltage of -250V to -25V, +25V to +250V / -500V to -50V, +50V to +500V, no load, AC volatge setting 0V (AC+DC mode) and 23°C ± 5°C 3. For an output voltage of 1.4V to 100V / 2.8V to 200V, Limited by the power capacity when the output voltage is 100V to 250V / 200V to 500V. 4. Within 5ms, Limited by the maximum current.
OUTPUT VOLTAGE STABILITY
*LINE REGULATION 1**				±0.2% or less
*LOAD REGULATION 2**				0.15% @45 – 65Hz; 0.5% @DC, all other frequencies (0 to 100%, via output terminal)
*RIPPLE NOISE 3**				0.7 Vrms / 1.4 Vrms (TYP)
1. Power source input voltage is 100V, 120V, or 230V, no load, rated output. 2. For an output voltage of 75V to 175V/150V to 350V, a load power factor of 1, stepwise change from an output current of 0A to maximum current(or its reverse), using the output terminal on the rear panel. *3. For 5Hz to 1MHz components in DC mode using the output terminal on the rear panel.
MEASURED VALUE DISPLAY
VOLTAGE	RMS, AVG Value*1		Resolution	0.1V
			Accuracy*2	For 45Hz to 65Hz and DC: ±(0.5% of reading + 0.3V/0.6V) For 40Hz to 999.9Hz: ±(0.7% of reading + 0.9V/1.8V)
	PEAK Value		Resolution	0.1V
			Accuracy	For 45Hz to 65Hz and DC: ±(\|2 % of reading\| + 1V / 2V)
CURRENT	RMS, AVG Value		Resolution	0.01A
			Accuracy*3	For 45Hz to 65Hz and DC:±(0.5% of reading+0.02A/0.02A); For 40Hz to 999.9Hz:±(0.7% of reading + 0.04A / 0.04A)	For 45Hz to 65Hz and DC:±(0.5% of reading+0.04A/0.02A); For 40Hz to 999.9Hz:±(0.7% of reading + 0.08A / 0.04A)
	PEAK Value		Resolution	0.01A
			Accuracy*4	For 45Hz to 65Hz and DC:±(\|2 % of reading\|+0.2A/0.1A)
POWER	Active (W)		Resolution	0.1 / 1W
			Accuracy*5	±(2% of reading + 0.5W)	±(2% of reading + 1 W)
	Apparent (VA)		Resolution	0.1/ 1VA
			Accuracy 56	±(2% of reading + 0.5VA)	±(2% of reading + 1VA)
	Reactive (VAR)		Resolution	0.1 / 1 VAR
			Accuracy57	±(2% of reading + 0.5 VAR)	±(2% of reading + 1 VAR)
LOAD POWER FACTOR			Range	0.000 to 1.000
			Resolution	0.001
LOAD CREST FACTOR			Range	0.00 to 50.00
			Resolution	0.01
HARMONIC VOLTAGE EFFECTIVE VALUE (RMS) PERCENT (%) (AC-INT and 50/60 Hz only)			Range	Up to 100th order of the fundamental wave
			Full Scale	175V / 350V, 100%
			Resolution	0.1V, 0.1%
			Accuracy*8	Up to 20th ± (0.2% of reading + 0.5V / 1V); 20th to 100th ± (0.3% of reading + 0.5V / 1V)
HARMONIC CURRENT EFFECTIVE VALUE (RMS) PERCENT (%) (AC-INT and 50/60 Hz only)			Range	Up to 100th order of the fundamental wave
			Full Scale	5A / 2.5A, 100%	10A / 5A, 100%
			Resolution	0.01A, 0.1%
			Accuracy*3	Up to 20th ± (1% of reading + 0.1A / 0.05A); 20th to 0th ± (1.5 % of reading + 0.1A / 0.05A)	Up to 20th ± (1% of reading + 0.2A / 0.1A); 20th to 0th ± (1.5% of reading + 0.2A / 0.1A)
1. The voltage display is set to RMS in AC/AC+DC mode and AVG in DC mode. 2. AC mode: For an output voltage of 17.5V to 175V / 35V to 350V and 23°C ±5°C. DC mode: For an output voltage of 25V to 250V / 50V to 500V and 23°C ±5°C. 3. An output current in the range of 5% to 100 % of the maximum current, and 23°C ±5°C. 4. An output current in the range of 5% to 100% of the maximum peak current in AC mode, an output current in the range of 5% to 100% of the maximum instantaneous current in DC mode, and 23°C ±5°C. The accuracy of the peak value is for a waveform of DC or sine wave 5. For an output voltage of 50 V or greater, an output current in the range of 10% to 100% of the maximum current, DC or an output frequency of 45Hz to 65Hz, and 23°C ± 5°C. 6. The apparent and reactive powers are not displayed in the DC mode. 7. The reactive power is for the load with the power factor 0.5 or lower. 8. An output voltage in the range of 17.5V to 175V / 35V to 350V and 23°C ± 5°C.
OTHERS
PROTECTIONS				OCP, OTP, OPP, FAN Fail
DISPLAY				TFT-LCD, 4.3 inch
MEMORY FUNCTION				10 sets for Store and Recall settings
ARBITRARY WAVE		Number of Memories		16 (nonvolatile)
		Waveform Length		4096 words
INTERFACE	Standard		USB	Type A: Host, Type B: Slave, Speed: 1.1/2.0, USB-CDC
			LAN	MAC Address, DNS IP Address, User Password, Gateway IP Address, Instrument IP Address, Subnet Mask
			EXT Control	External Signal Input; External Control I/O
	Factory Optional		GPIB	SCPI-1993, IEEE 488.2 compliant interface
			RS-232C	Complies with the EIA-RS-232 specifications
INSULATION RESISTANCE Between input and chassis, output and chassis, input and output				500 VDC, 30MΩ or more
WITHSTAND VOLTAGE Between input and chassis, output and chassis, input and output				1500 VAC, 1 minute
EMC				EN 61326-1 (Class A) EN 61326-2-1/-2-2 (Class A) EN 61000-3-2 (Class A, Group 1) EN 61000-3-3 (Class A, Group 1) EN 61000-4-2/-4-3/-4-4/-4-5/-4-6/-4-8/-4-11 (Class A, Group 1) EN 55011 (Class A, Group1)
Safety				EN 61010-1
Environment		Operating Environment		Indoor use, Overvoltage Category II
		Operating Temperature Range		0°C to 40°C
		Storage Temperature Range		-10°C to 70°C
		Operating Humidity Range		20% RH to 80% RH (no condensation)
		Storage Humidity Range		90% RH or less (no condensation)
		Altitude		Up to 2000 m
DIMENSIONS & WEIGHT				ASR-2000 : 285(W)×124(H)×480(D) (not including protrusions); Approx. 11.5 kg ASR-2000R : 213(W)×124(H)×480(D) (not including protrusions); Approx. 10.5 kg

Specifications subject to change without notice.

ORDERING INFORMATION

ASR-2050 500VA Programmable AC/DC Power Source
ASR-2100 1000VA Programmable AC/DC Power Source
ASR-2050R 500VA Programmable AC/DC Power Source for 3U 1/2 Rack Mount
ASR-2100R 1000VA Programmable AC/DC Power Source for 3U 1/2 Rack Mount

ACCESSORIES

CD ROM (User Manual, Programming manual), Safety Guide, Power Cord, Mains Terminal Cover Set, Remote Sense Terminal Cover Set, GTL-123 Test Lead, GTL-246 USB Cable