Deskripsi
Fujikura 45S Active Core Alignment Fusion Splicer
The 45S cladding alignment fusion splicer is changing the way people splice fiber in small to mid-fiber count applications. This Fujikura splicer debuts a landmark improvement to the fusion splicing process with the ability to prepare and load both fibers simultaneously. The hand-held fiber coating stripper, the SS-05, is capable of stripping two 250 μm coated fibers in the same pass, along with the CT-16A cleaver adapter plate which can likewise accommodate two bare fibers for cleaving. After preparation, the 45S patented sheath clamps enable loading both fibers simultaneously into the splicer with one fiber in each hand. The user can press down on the sheath clamp base to close it while positioning the fiber in the v-grooves. This enables onehanded operation.
Furthermore, the 45S sheath clamps are mechanically linked to the wind protector, so after splicing is finished, opening the wind protector also opens both sheath clamps for quick sleeve positioning and transfer to the tube heater. The 45S tube heater shrinks sleeves much faster than its predecessor with a nominal ~20 second heat time for 60 mm sleeves down from ~26 seconds. The simultaneous fiber preparation capability, automated sheath clamp opening, and a faster tube heater, combine to lower the overall fusion splicing cycle time by ~30% or more.
The 45S continues to benefit the user experience with improvements to fiber placement, battery access, and machine ergonomics. Previously, when using sheath clamps, if the cleaved fiber was accidentally set past the electrode centerline, the machine would send an error and require manual intervention. The 45S will now accept this mistake and reverse the fiber to correct position automatically. With a cube form factor, the 45S is easily transported and operated in space-constrained environments. The adjustable screen can alleviate glare from the sun and adjust with abnormal splicer positions confronted in challenging splice locations.
Features
- Simultaneous fiber preparation with newly patented sheath clamp design
- Sheath clamps automatically opened with the wind protector
- Automatic fiber placement correction
- Active Fusion Control for arc optimization with every splice
- Active Blade Management for cleave quality monitoring and correction
- Easy-access battery, screen position adjustments, and ergonomic adaptations
- Fully ruggedized for shock, moisture and dust resistance
Applications
- 5G Small Cell Site
- FTTx drops and terminations
- MDF/IDF splices and terminations
- Rural fiber deployments and restorations
Specifications
| Fiber Alignment Method | Active Cladding Alignment | |
| Fiber Count Can Be Spliced | Single Fiber | |
| Applicable Fiber | Fiber Type | Single-Mode Optical Fiber |
| Multimode Optical Fiber | ||
| Cladding Diameter | Approx. 125 μm | |
| Applicable Coating | Sheath Clamp | Coating Dia.: Max. 3,000 μm |
| Cleave Length: 5 to 16 mm | ||
| Fiber Holder | Coating Dia.: 160 μm – 3,000 μm based on available fiber holder options | |
| Cleave Length: Approx. 10 mm | ||
| Fiber Splice Performance | Splice Loss | ITU-T G.652: Avg. 0.03 dB |
| ITU-T G.651: Avg. 0.01 dB | ||
| ITU-T G.653: Avg. 0.05 dB | ||
| ITU-T G.655: Avg. 0.05 dB | ||
| ITU-T G.657: Avg. 0.03 dB | ||
| Splice Time | SM FAST mode: Avg. 6 to 7 sec. | |
| SM AUTO mode: Avg. 8 to 10 sec. | ||
| Applicable Protection Sleeve | Sleeve Type | Heat-Shrinkable Sleeve |
| Sleeve Length | Max. 66 mm | |
| Sleeve Dia. | Max. 6.0 mm before shrinking | |
| Sleeve Heat Performance | Heat Time | 60 mm slim mode: Avg. 15 to 22 sec. |
| 60 mm mode: Avg. 15 to 17 sec. | ||
| Fiber Tensile Test Force | Approx. 2.0 N | |
| Electrode Life | Approx. 6,000 splices | |
| Physical Description | Dimensions W | Approx.131 mm without projection |
| Dimensions D | Approx.123 mm without projection | |
| Dimensions H | Approx.121 mm without projection | |
| Weight | Approx. 1.4 kg including battery | |
| Environmental Condition | Temperature | Operate: -10 to 50°C |
| Storage: -40 to 80°C | ||
| Humidity | Operate: 0 to 95% RH non-condensing | |
| Storage: 0 to 95% RH non-condensing | ||
| Altitude | Max. 5,000 m | |
| AC Adaptor | Input | AC100 to 240 V, 50/60 Hz, Max. 1 A |
| Output | Approx. DC 19V, Max. 2.1A | |
| Battery Pack | Type | Rechargeable Lithium Ion |
| Output | Approx. DC14.4V / 3,190mAh | |
| Capacity | 60 mm heat mode: Approx. 200 splice & heat cycles | |
| 60 mm slim heat mode: Approx. 230 splice & heat cycles | ||
| Temperature | Operate: -10 to 50°C | |
| Recharge : 0 to 40°C | ||
| Short term storage of 30 days: -20 to 50°C | ||
| Long term storage: -20 to 30°C | ||
| Battery Life | Approx. 500 recharge cycles | |
| Display | LCD Monitor | TFT 4.95 inches with touch screen |
| Magnification | Approx. 132 to 300X | |
| Illumination | V-Grooves | LED lamp |
| Interface | PC | USB2.0 Mini B type |
| External Led Lamp | USB 2.0 A type | |
| Approx. DC5V, 500mA | ||
| Wireless | Bluetooth® 5.2 | |
| Data Storage | Splice Mode | 100 splice modes |
| Heat Mode | 30 heat modes | |
| Splice Result | 20,000 splices | |
| Splice Image | 100 images | |
| Screw Hole for Tripod | 1/4-20UNC | |
| Other Features | Automatic Functions | Fusion control |
| Blade management and control | ||
| Splice start | ||
| Heater start | ||
| Reference Guide | PDF file stored on splicer | |
| Sheath Clamp | Open with/without wind protector | |
| Close when setting fiber | ||
| Easy sleeve positioning clamp | ||
| Electrode | Tool-less replacement | |
| PC Software | Splicer firmware update via internet | |
| Parameter Upload and download | ||
| Includes | CT-50 cleaver, SS-05 single fiber stripper, 1 pair each FH-70-250 and FH-70-900 fiber holders, FH-FC-900 (900 µm cable), SP-04 set plates, ELCT2-16B Spare Electrodes (Pair), ADC-21 AC Adapter, BTR-17 Battery Pack (installed), ACC-09 Power Cord, USB-01 USB Cable, AP-02 Alcohol Container, WT-10 work tray, ST-03 carrying case strap, TS-03 tripod screw, CC-45 Transit Case, 1-year factory warranty, and instruction manual downloaded from splicer | |
Ulasan
Belum ada ulasan.