Fluke Networks Pro3000F60-KIT Tone Generator and Filtered Probe

Deskripsi

Fluke Networks Pro3000F60-KIT Tone Generator and Filtered Probe

 

The Pro3000F filtered probe, 60 Hz, “Stops the Buzz” by obstructing signal interference and unfiltered toner, for use on inactive networks, uses SmartTone™ technology, with five different tones to allow the technician to easily identify individual pairs.

 

Features

• Innovative filtered probe obstructs signal of 60 Hz interference
• Analog tone generator with bed-of-nails clips
• Send tone signal up to 10 miles (16 km) on most cables
• SmartTone™ provides 5 distinct tones for exact pair identification
• Powerful speaker makes tracing cables quick and easy

.

Specifications

Pro3000 Analog Toner Specifications
User Interface	Slide switch selects Continuity or Tone Mode Push button switch selects SOLID, ALT or OFF Tone mode LED Continuity/Polarity LED
Solid Frequency	1000 Hz nominal
Alternating Frequency	1000/1500 Hz nominal
Over Voltage Protection	60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode	8 dbm into 600 ohms
Output Voltage Level in Continuity Mode	8 Vdc with fresh battery
Battery	9V alkaline
Temperature	Operating: -20° C to 60° C, Storage: -40° C to 70° C
Case Dimensions	2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)
Pro3000 Analog Probe Specifications
User Interface	ON/OFF push button Volume dial Replaceable tip 3.5 mm earphone jack
Battery	9V alkaline
Temperature	Operating: -20° C to 60° C, Storage: -40° C to 70° C
Case Dimensions	9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm)

 

Datasheet