Deskripsi
Overview
MT-8200-60A Probe detects IntelliTone™ digital signals on active networks and 500 to 1,200 Hz analog signals on inactive networks to locate, trace, and isolate copper cabling
Specifications
General | |
Operating Temperature | 32 °F to 104 °F (0 °C to 40 °C) |
Storage Temperature | -4 °F to +140°F (-20 °C to °C) |
Operating Relative Humidity (% RH without condensation) | 95 % (50 °F to 95 °F; 10 oC to 35 °C) 75 % (95 °F to 104 °F; 35 °C to 40 °C) Uncontrolled < 50 °F (< 10 °C) |
Vibration | 60 Vdc in Toner/Polarity Mode |
Shock | 1 m drop test |
Safety | EN 61010-1, Category: None |
Altitude | 3000 m |
EMC | EN 61326-1, FCC Part 15 B |
Battery Type and Life | 9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical |
Applications | Copper cabling media including; 75 or 50 Ohm Coaxial cable; Two Conductor control, security, generic cabling. 10 Base-T or 10/100 Base-T datacom networks. UTP cable. Shielded Twisted Pair supported in Cablemap function of the IntelliTone 200. |
Includes | IntelliTone 200 LAN Toner and 200 Probe, coax F connector adapter, (2) RJ11 and (2) RJ45 patch cables, test leads with alligator clips, (2) lanyards, quick start guide, and (2) 9-volt batteries |
Toner Specifications | |
Dimensions | 5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm) |
Display | LED |
Control | Thumbwheel switch |
Toner Interface | Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling. F Connector for coaxial cabling Banana Jack Plugs (2) – two conductor wiring |
Toner Frequency | IntelliTone™ signal: encoded digital signal Analog SmartTone signal: 500 – 1200Hz, 4 songs |
Ouptut Power | 5 V p-p |
Auto Power Down | Turns off automatically after 2 1/2 hours of inactivity |
Probe Specs | |
Dimensions | 8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm) |
Display | (8) LED indicators, Sync LED indicator |
Audio | IntelliTone: Microprocessor controlled audio files Analog: Detected toner signal |
Control | Thumbwheel switch, volume control wheel |
Tone Detection | Detects IntelliTone™ digital signal for Locate, Isolate, and CableMap Detects analog SmartTone signal (500-1200Hz) and other analog toners. |
Toner Interface | Main Mod8 port for cablemap on all 4 pairs of UTP / STP cabling. |
Auto Power Down | Turns off automatically after 1 hour of inactivity |
Fluke Networks MT-8200-60A IntelliTone™ Pro 200 Probe – Datasheet
Ulasan
Belum ada ulasan.