Fluke Networks MicroScanner™ PoE Cable Verifier

Deskripsi

Fluke Networks MicroScanner™ PoE Cable Verifier

 

MicroScanner™ PoE takes the confusion out of PoE installation by providing quick and easy PoE verification.

This tester detects the available PoE class (0-8) according to the latest PoE standards and displays the voltage from the passive PoE source. Everything a cable technician needs to know, including available services (up to 10G Ethernet), cable length, cable map, cable ID, and distance from faults are all displayed on the LCD screen.

Built-in IntelliTone digital and analog sounder accurately finds virtually any cable or pair of cables, even on an active network.

Ergonomic design with a combination of slim molded rubber for increased grip and toughness.

Includes MicroScanner™ Power over Ethernet (POE) cable tester with removable cable map adapter, getting started guide (10 languages), 2 AA alkaline batteries, carrying case, and one-year warranty.

 

Features

• PoE Report Class (0-8)
• Featuring network switch speed capabilities up to 10G
• Ethernet Alliance certified to IEEE-802.3™ standards
• Displays cable length, cable map, and distance from fault.
• Find and trace cables by sound (probe sold separately)

 

Specifications

Environmental Specifications
Operating temperature	32 °F to 113 °F (0 °C to 45 °C)
Storage temperature	-4 °F to +140 °F (-20 °C to +60 °C)
Operating relative humidity (% RH without condensation)	90 % (50 °F to 95 °F 10 °C to 35 °C) 75 % (95 °F to 113 °F 35 °C to 45 °C)
Shock and Vibration	Random, 2 g, 5 Hz-500 Hz (Class 2) Drop test at 1 m with and without cable map attached
Safety	IEC 61010-1 3rd Edition
Height	4,000 m; Storage: 12,000 m
EMC	IEC 61326-1

 

General Specifications
Test connector	The shielded 8-pin modular jack accepts both 8-pin modular (RJ45) and 4-pin modular (RJ11) connectors.
Power	Battery type: 2 AA alkaline batteries (NEDA 15A, IEC LR6) Battery life: Typically 20 hours of use Other compatible battery types: 2 AA photo lithium, NIMH, NICAD
Dimensions and weight (with battery installed and wired map adapter attached)	3 in. x 6.4 in. x 1.4 in. (7.6 cm x 16.3 cm x 3.6 cm) PoE MicroScanner™: 10.6 oz (300 g)
Screen	Monochrome LCD with backlight

 

Test Mode
Cable testing	Measure length, verify cable maps, identify Remote ID locators, and detect Ethernet ports. The PoE MicroScanner™ will also indicate HIGH Ω if the cable resistance is greater than 12.5 Ω. Displays results on one screen.
Signal sound	Generates IntelliTone™ signals and normal analog sound signals.
PoE	PoE MicroScanner™: Discovers and detects the presence of PoE devices compatible with 802.3af, at, bt, and UPOE (Cisco Universal Power over Ethernet)

 

Performance Specifications
Type of cable tested	Twisted pairs: UTP, FTP, SSTP
Long test	Range: 460 m (1,500 ft) Resolution: 0.3 m (1 ft) Typical accuracy: ± 4% or 0.6 m (2 ft), whichever is greater. NVP uncertainty is an additional error. Calibration: User-settable NVP for twisted pairs. Can determine actual NVP with known cable length.
Cable map testing	Detects single-wire faults, short circuits, cable faults, split pairs, and up to seven adapter IDs with far ends. The cable map is drawn with proportional lengths to visually show the approximate location of the fault.
Ethernet port detection	PoE MicroScanner™: Detects advertised 802.3 Ethernet port speeds of 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, and 10 Gbps.
Signal Sound Generator	Supports audible signaling and cable mapping with Fluke Networks digital IntelliTone™ probes. Produces four audible signals compatible with typical analog probes. The SmartTone™ feature provides positive cable identification in bundles when using analog or IntelliTone probes.

 

Datasheet