Deskripsi
Overview
The FLS-240 is the easiest way to identify fibers from end to end and locate polished connector endfaces. Its red laser shines through most yellow-jacketed fibers to help you pinpoint breaks, bends, faulty connectors, splices and other causes of signal loss. It has a reach of up to 5 km *. The convenient FLS-240 locates faults visually by creating a bright red glow at the exact location of the fault on single mode or multimode fibers.
Due to its small size, lightweight and simple but proven design, the FLS-240 can accompany you anywhere. In your pocket or belt pouch, carry your FLS-240 to the most demanding environments. To ensure ruggedness, it features rubber seals, a fully enclosed laser head and a long-lasting On/Off switch. It has been tested to provide reliable operation under intensive use and harsh conditions.
* Typical length of continuous fiber at which end-to-end identification is possible. VFL depends on ambient light conditions at test site.
Specifications
| Operation (Hz) | 2 to 4 | |
| Wavelength (nm) | 630 to 645 | |
| Emitter Type | Laser | |
| Power Output b (typical) (mW) | 0.8 | |
| Distance Range c (typical) (km) | 5 | |
| Operation Mode | Pulsed and CW | |
| General Specifications | ||
| Power Supply | 2 AAA alkaline batteries | |
| Laser Class | 2M | |
| Battery Life d (h) | CW | 35 |
| Pulsed | 50 | |
| Length | 17.5 cm (6 7/8 in) | |
| Maximum Diameter | 2.5 cm (1 in) | |
| Weight | Without Batteries | 80 g (4.8 oz) |
| With Batteries | 120 g (6.3 oz) | |
| Temperature | Operating | —10 °C to 50 °C (14 °F to 122 °F) |
| Storage | —30 °C to 60 °C (—22 °F to 140 °F) | |
| Standard Accessories | User guide, two AAA alkaline batteries, belt clip and certificate of compliance | |
EXFO FL-240 – Datasheet
Ulasan
Belum ada ulasan.