Description
ICOM IC-FR5000 VHF IDAS Digital Repeater
Unique Two-in-One Repeaters
FEATURES
Two RF Modules in One Unit
The IC-FR5000/FR6000 series has an internal space for installing an optional RF unit, UR-FR5000 or UR-FR6000. Two RF modules can be installed in a chassis reducing installation space, and increasing channel capacity. They can be programmed and operated independently.
50W Output at 50% Duty Cycle or 25W 100% Duty Cycle Operation*
Employing a high performance power amplifier, the IC-FR5000 series provides a reliable 100% duty cycle operation at 25W output. When operated at the high power setting of 50W, the repeater operates with a 50% duty cycle.
* Ambient temperature: 25°C
50W Output at 100% Duty Cycle or 100W 50% Duty Cycle Operation with Optional Power Amplifier*
When need higher power, the optional UR-PA5000/UR-PA6000 series power amplifier provides 100W output power with a 50% duty cycle and 50W output with 100% duty cycle.
* Ambient temperature: 25°C
19-inch Rack Mount Design, 2U Height Low Profile Design
The IC-FR5000/FR6000 series has a rack mount bracket and handles for installation in an industry standard 19-inch rack.
Multiple CTCSS and DTCS Tone Decode
The IC-FR5000/FR6000 series detects multiple CTCSS and DTCS on a channel (up to 16 tones on a table) and downlinks (transmits) the received signal with a specified tone. This function is useful for sharing a channel with multiple groups.
Base Station Operation
The IC-FR5000/FR6000 series has 5 programmable buttons, 12-digit dot-matrix display and 32 memory channels allowing you to use the repeater as a base station.
Other Features
- Programmable accessory connector (D-sub 25-pin) for connecting trunking controllers or other external devices
- 5-Tone and DTMF encoder/decoder
- CW ID transmitter
- Normal and priority scan setting
- Wide frequency coverage
- Built-in audio compander
- Built-in inversion type voice scrambler*
* Inversion type voice scrambler is not compatible with UT-109R/UT-110R voice scrambler.
SPECIFICATIONS
GENERAL
Frequency coverage (Varies according to version) |
136-174 MHz | ||
Number of channels | 32 ch | ||
Channel spacing (Varies according to version) |
6.25/12.5/25 or 7.5/15/30 kHz | ||
Type of emission | 16K0F3E, 11K0F3E, 11K0F7E/D/W, 8K50F3E, 4K00F1E/D, 4K00F3E |
||
Power supply requirement | 13.6V DC | ||
Current drain (at 13.6V DC) |
Tx High | 15A | |
Rx | Stand-by | 500mA*¹ | |
Max. audio | 1900mA | ||
Dimensions (projections not included; W×H×D) |
483×88×260 mm 19.02×3.46×10.24 in |
||
Weight (approx.) | 5.6kg; 12.3lb |
*1 Repeater operation only.
TRANSMITTER
RF output power (High) | 50W |
Spurious emissions | 80dB |
Frequency stability | ±0.5ppm |
Audio harmonic distortion | 1% typical 40% deviation |
FM Hum and Noise | 52dB typ. (W) 49dB typ. (N) |
Digital FSK error | 5% max. |
RECEIVER
Sensitivity | FM at 12dB SINAD | 0.25µV (typ.) |
Digital at 5% BER | 0.20μV (typ.) | |
Adjacent channel selectivity (W/N) | 78/56dB typ. | |
Spurious response rejection | 90dB typ. | |
Intermodulation rejection | 78dB typ. | |
AF output power (at 5% distortion) | 4.0W (typ.) with a 4Ω load |
FUNCTION COMPARASION and INTERNAL UNIT OPTIONS
Type-C multi-site trunking | N/A | |
Type-D multi-site trunking | UC-FR5000 Version 03 | |
Type-D single-site trunking | UC-FR5000 Version 01 | |
LTR™ Tranking | available*¹ | |
Multi-site Conventional | UC-FR5000 Version 02 | |
Voice Scrambler (Digital) | available | |
DES Encription | N/A | |
AES Encription | N/A | |
Voice Scrambler (Analogue)*2 | Inversion | available |
CTCSS/DTCS | encoder | available |
decoder | available | |
2-Tone | encoder | N/A |
decoder | N/A | |
5-Tone | encoder | available |
decoder | available | |
DTMF autodial | available | |
DTMF decoder | available | |
BIIS 1200 | – | |
MDC 1200 | – |
*¹ External controller required.
*² Inversion type voice scrambler is not compatible with UT-109R/UT-110R voice scrambler.
Supplied Accessories
- DC power cable
- Handle kits
- Key assign stickers
Reviews
There are no reviews yet.